Packaging & Material Handling Electric Cylinder Applications
Application Solution · Typical Configuration. Electric cylinders can be considered for guided pushing, transfer, lifting and line changeover axes when the machine load, cycle profile and safety functions are defined. This overview does not represent a delivered NEFEIT customer project or measured result.
Where Electric Actuation Fits
Pushing, Diverting and Sorting
A programmable stroke may move a pusher or diverter within a guided mechanism. Specify package mass, contact force, impact risk, travel, line speed and the required response to a jam before selecting an actuator.
Transfer, Lifting and Changeover
Electric axes can position a transfer carriage or adjust a machine format. Vertical loads require particular attention to holding, external guidance, recovery after power loss and the equipment safety concept.
Engineering Checks Before Specification
Review payload, stroke, peak push force, acceleration, cycle frequency, mounting space, end-of-travel protection, external guidance, washdown or dust exposure and maintenance access. The integrator must validate guards, interlocks and fault recovery for the complete machine.
Typical Configuration and Evidence
A typical configuration pairs a guided linear axis or servo electric cylinder with a compatible motor, drive and controller. Model selection and acceptance criteria depend on the actual application. No customer installation, throughput improvement or service-life result is claimed here.
Discuss Your Handling Requirement
Share your load, travel, cycle rate, available envelope, machine layout and control interface. NEFEIT can review a suitable actuator architecture with your engineering team.